The oil-water separator is a device, which is divided into two types: catering oil-water separator and industrial oil-water separator. The catering oil-water separator is used to treat sewage in the catering industry; Due to the requirements of environmental protection, the sewage discharged into the ships and machinery spaces in rivers, lakes and seas must be treated, and the industrial oil-water separator needs to be used.
working principle
The oily sewage is sent to the oil-water separator by the sewage pump. After passing through the diffusion nozzle, the large oil droplets float up on the top of the left oil collecting chamber
The sewage containing small oil droplets enters the corrugated plate coalescer in the lower part, where the oil droplets in the polymerized part form large oil droplets to the right oil collecting chamber
The sewage containing oil droplets with smaller particles passes through the fine filter to discharge impurities in the water, and then enters the fiber polymerizer in order to make the small oil droplets polymerize into larger oil droplets and separate them from water.
After separation, the clean water is discharged through the drain port, the dirty oil in the left and right oil collecting chambers is automatically discharged through the solenoid valve, and the dirty oil separated from the fiber polymerizer is discharged through the manual valve.
Tính năng sản xuất
1. Small size, portable, easy to use
2. Two-stage separation, good effluent effect, can be discharged directly up to standard
3. No dosing pretreatment is required, and the discharge can be directly up to standard
4. The separation speed is ten times faster than that of general gravity separation
5. Automatic operation and convenient maintenance
Tham số sản xuất
Mô hình | SN 909030 |
Nơi bắt đầu | Hà Nam, Trung Quốc |
Tên thương hiệu | LVDA |
Tuổi thọ | 4000H |
Giấy chứng nhận | ISO9001:2015 |
Chất lượng | Thử 100% |
Nhiệt độ làm việc | -10~+100℃ |
Áp lực làm việc | -21~210 bar |
D1 (mm) | 111.0mm |
D2 (mm) | 108.0mm |
D3 (mm) | 91.0mm |
Đường D7 | 1"-14UNF |
D8 thread 2 | M95X2,5 |
H1 (mm) | 158.0mm |
H2 (mm) | 155.0mm |
H3 (mm) | 143.5mm |
Ứng dụng sản xuất
1. Dùng cho cối xay thép,
nhà máy năng lượng 2,
ba lần ký thác mã nguồn,
4. nhà máy giấy,
5 giấy làm cho trạm thủy lực kinh doanh được lọc,
6 giờ sáng,
7 phút,
ngành công nghiệp hóa học 8,
đường số 9,
sân bay 10,
11. khai thác dầu,
máy bay số 12,
13 cuộc điện tử,
năng lượng 14,
15 phút,
16 bảo vệ môi trường,
* Nhà sản xuất chuyên nghiệp với nhiều năm kinh nghiệm
□ Chất lượng tốt với giá cạnh tranh
; OEM &am; ODM được chào đón
□ Các món hàng thanh toán khác nhau được chấp nhận
· Dịch vụ tốt của người quản lý có kinh nghiệm