Thành phần lọc thay thế phù hợp cho P167886,Donaldson HYDRAlC FILTER, CARTRIDE,96*56*324

Chi tiết sản xuất

 Donaldson P167886 Replacement Filter

Our Donaldson P167886 replacement hydraulic filter is a guaranteed direct replacement in form, fit, and function. This means the filter will fit and you should expect performance to be equal to or greater than the OEM filter. 

Filtration Media for the Donaldson P167886 direct interchange

Our filter media is backed by ISO 16889 multi-pass testing and other ISO/SAE test protocols and the filter is produced in an ISO Certified manufacturing facility. An ISO Certified manufacturing facility is all about quality control, consistency, responsibility, and being true to the design. Optimized microglass media is used for fine filtration, just like the Donaldson P167886 hydraulic filter to be replaced. Our microglass filters use the optimal amount of media and pleats to ensure high dirt-holding capacity. The correct number and design of pleats in the element will give you the lowest initial pressure drop. Therefore the filter will take longer to reach its change-out pressure drop which is usually 25 PSID.

Micron Rating for the Donaldson P167886 cross

This Donaldson P167886 hydraulic filter replacement element is beta-rated. The filter performance is outstanding. The Beta X = 1000 number means that for every 1000 particles of x size in the fluid only one particle will pass through the filter on average.

3 Micron; B3 = 200, B4.5 = 1000 equivalent to efficiency of 99.9%

Filter Collapse Pressure for the Donaldson P167886 cross reference

A filter collapse pressure of 363 PSID Collapse means that if the filter is completely clogged and the build up of pressure reaches or surpasses 363 PSID Collapse the filter may collapse and allow contamination downstream. Please use a satisfactory safety factor for the filter.

Compatible Fluids

This filter is compatible with the following fluids but pressure drop will vary depending on viscosity and temperature:

Hydraulic Fluid and Machining Fluids

Diesel and other fuels

Lubricating Oils and Synthetic Lubricants

Turbine and Compressor Lube Oils … And many more fluids

Tính năng sản xuất

1.LVDA bộ lọc thủy lực yếu tố có độ bão hòa cao, khả năng ổn định tốt, sự kháng cự nhỏ và áp lực vi phân thấp

Nó có nhiệt độ kháng nhiệt độ cao, kháng viêm và thích hợp cho việc lọc chất lỏng có chất lỏng rất lỏng.

3. Khu vực lọc là rộng và dung tích giữ đất là lớn.

Tham số sản xuất

Ứng dụng sản xuất

1. Công nghiệp hóa sinh và hóa dầu

Ngành công nghiệp thực vật 2

Máy khởi động 3

4. Food &am; công nghiệp đồ uống

Máy móc 5

6 Ngành công nghiệp